KraftMaid Driveway & Pavers Nationwide

KraftMaid Driveway & Pavers: The Pomona Owner’s Guide

KraftMaid driveway and paver installations in Pomona typically run $7,000-$18,000 for paver driveways and $3,500-$11,000 for paver patios, with most replacement parts and repairs completed in a single visit. We stock KraftMaid-compatible edge restraints, polymeric sand, and paver substrates on our Pomona trucks, and we carry the full line of Belgard and Techo-Bloc paver systems that integrate with KraftMaid outdoor kitchen and hardscape designs. Most owners first notice trouble when settling creates visible dips after winter rains, or when polymeric sand washes out from between pavers along the driveway apron.

Call (626) 606-1081

Which KraftMaid Models This Applies To

KraftMaid does not manufacture pavers directly; instead, the brand specifies Belgard and Techo-Bloc paver systems for its outdoor kitchen, fire pit, and patio configurations. If you’re working from a KraftMaid outdoor plan, the part number you need is usually buried in the installation packet labeled “Site Prep & Hardscape Specifications.” Look for a Belgard series code (Cambridge Cobble, Dublin Cobble, or Lafitt Rustic Slab are common in Southern California) or a Techo-Bloc identifier (Blu 80, Eva, or Antika).

The critical compatibility gotcha in Pomona: KraftMaid’s 2020-2023 outdoor kitchen specs called for a 6-inch compacted aggregate base, but the 2024 refresh moved to 8 inches for frost-heave protection. Most Pomona yards don’t frost heave, but if your plan says 2024 or later and your existing base is 6 inches, a straight paver swap won’t meet spec. We measure twice, then we can talk.

OEM Belgard edge restraints run 30-40% more than quality aftermarket equivalents from Dimex or PaveTech. For residential driveways under light passenger traffic, we install the aftermarket restraints and document the spec in your photo record. For driveways with RV pads or commercial loading, we stick with Belgard’s commercial-grade restraint, which carries a 15-year manufacturer’s warranty against lateral spread.

Signs Your KraftMaid Driveway & Pavers Is Failing

• Sunken or dipping sections near the garage apron or street edge. This usually means the aggregate base has washed out or was never compacted to 98% Proctor density. In Pomona, the clay-heavy soils near the foothills settle differentially after heavy winter rains, and water follows the driveway slope into the subgrade.
• Weeds growing between pavers where polymeric sand used to sit. The sand binding agent has degraded, typically from UV exposure or pressure-washing with too narrow a tip. Once the sand goes, the interlock goes, and individual pavers start rocking under tire load.
• Chipped or spalled paver surfaces, especially on the driveway’s sun-facing side. Belgard’s standard Cambridge Cobble is rated for 8,000 PSI; if you’re seeing surface degradation in under 10 years, the batch may have been under-cured or the wrong series was specified for vehicular traffic.
• Edge restraints pulling away from the perimeter, creating a gap where pavers slide outward. This is almost always a fastening failure, either from inadequate spike depth (should be 8 inches into undisturbed soil) or from using plastic rather than steel edging on a driveway that sees daily vehicle traffic.
• Standing water more than 30 minutes after rain, or white efflorescence blooming on paver faces. Poor drainage slope or a blocked permeable base layer. In Pomona’s hardpan soils near Ganesha Park, we sometimes find the original installer skipped the geotextile separation layer, and native clay has migrated up into the aggregate.

Before

After

Replacement Cost & What’s Included

What drives the range: access (steep Pomona hillsides require hand-carrying materials), the condition of the existing base (salvageable vs. full rebuild), and whether we’re matching discontinued paver colors. Under Clause 1 of the Haven Standard, your written quote itemizes base prep, materials, labor, and disposal separately. No work proceeds on a change until the change order is signed. The 365-Day Done Right Promise covers settling, joint failure, or edge creep at no additional labor charge.

DIY or Call Us?

What you can safely check: measure the depth of visible settling with a straightedge and flashlight, photograph any efflorescence or spalling for documentation, and verify your original KraftMaid plan series year against the base depth spec above. Flag any sprinkler heads or drainage cleanouts that have surfaced since installation.

Where DIY goes wrong: pulling pavers without understanding the base layer sequence almost always damages the interlock pattern beyond simple relay. Compacting a new base requires a plate compactor at 5,000+ pounds of centrifugal force, and running one without training risks shattering adjacent pavers or compacting unevenly. Polymeric sand must be applied to bone-dry pavers and activated with a light, even water mist; too much water washes the binder into the base, too little leaves a haze that etches the surface.

We carry KraftMaid-compatible paver inventory, edge restraints, and specified sands on our Pomona trucks. Call (626) 606-1081 to schedule your free estimate.

FAQs