Wellborn Kitchen Remodeling Nationwide

Wellborn Kitchen Remodeling: The Pomona Owner’s Guide

Wellborn kitchen remodeling in Pomona typically runs $14,000-$45,000 for a full project, with cabinet installation alone at $4,000-$13,000. We stock Wellborn-compatible components across the Classic, Premier, and Estate series, and we can usually source same-day what we don’t carry on the truck. Most Pomona homeowners find us after a cabinet box starts sagging, a drawer glide seizes, or a hinge cup cracks - the slow failure that turns a kitchen from functional to frustrating.

Call (626) 606-1081

Which Wellborn Models This Applies To

Wellborn organizes its cabinetry into three series, and the hardware differs enough that matching matters. The Classic Series uses standard 35mm cup hinges and 75-pound-rated side-mount drawer glides. The Premier Series steps up to soft-close 45mm hinges and undermount glides rated for 100 pounds. The Estate Series runs full-extension soft-close hardware with integrated damping, and the hinge bore pattern shifts to a 48mm spacing that won’t accept Classic hardware without re-drilling.

To identify your series, check the interior stamp on the hinge cup or the printed label inside the sink-base door. The model prefix tells the story: CL for Classic, PR for Premier, ES for Estate. We carry OEM Blum and Grass hardware for Wellborn spec, plus a vetted aftermarket line from Salice that meets the same cycle ratings at roughly 30% less cost. For Estate series work, we typically recommend staying OEM - the integrated damping is calibrated to Wellborn’s door weight, and aftermarket equivalents often close too fast or chatter. Measure twice, then we can talk.

Signs Your Wellborn Kitchen Remodeling Is Failing

• Doors hang crooked or won’t stay shut. The 35mm or 45mm hinge cup has cracked or the mounting plate screws have stripped out of the particleboard stile. In Pomona’s dry summer heat, the compressed wood fibers around the screw bore shrink and lose grip.
• Drawers stick, slam, or won’t fully extend. The glide ball bearings have gummed with cooking grease and dust, or the load rating has been exceeded - common when owners convert a 75-pound Classic drawer to hold cast iron.
• Sink base shows water staining or swelling at the floor. The vinyl drawer box or plywood base has delaminated from chronic moisture exposure. Wellborn’s standard sink base uses a 3/4-inch plywood floor; without the optional polymer tray, repeated overflow events seep through the finish.
• Corner cabinet carousel binds or tilts. The polymer bearing ring has flattened or the center shaft has worked loose from its top anchor. Lazy Susan hardware takes more load than most owners realize.
• Soft-close feature stops working on one door. The Blumotion clip has detached or the nylon damping cylinder has worn out - a 50,000-cycle part in a kitchen that sees 20 cycles daily lasts roughly seven years.

Before

After

Replacement Cost & What’s Included

What drives the range: cabinet count, finish grade, and whether we’re matching existing or starting fresh. Under Clause 1 of the Haven Standard, your written price includes parts, labor, haul-away, and the documented photo record - no line item gets added after the fact without a signed change order. The 365-Day Done Right Promise covers the installation workmanship. We also stock KraftMaid and Silestone components for mixed-brand kitchens.

DIY or Call Us?

There’s honest work an owner can do: swapping a Blumotion clip, tightening a loose mounting plate, or cleaning and relubricating a glide track with white lithium grease. These take a #2 Phillips and twenty minutes.

Where DIY goes wrong: re-boring a stripped hinge cup without a 35mm Forstner jig and depth stop - the bit walks, the cup sits crooked, and the door never seals right. Replacing undermount glides requires removing the drawer box, which on Premier and Estate series means detaching the front from the box sides without damaging the finish-matched screws. And any work involving the sink base floor means supporting the counter temporarily; a dropped quartz slab runs $2,000-plus to replace.

We’re not affiliated with Wellborn - we’re an independent contractor with fifteen years of fitting their hardware to Pomona’s mix of 1950s bungalows and new infill. If you’re staring at a stripped screw bore and wondering whether the stile is salvageable, call (626) 606-1081. We’ll look at it, name the price in writing, and you decide.

FAQs