Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CertainTeed Fence Installation: The Pomona Owner’s Guide
We stock and install CertainTeed-compatible vinyl and aluminum fence systems in Pomona, with typical installed prices running $3,500-$9,000 depending on linear footage, terrain, and whether we’re pulling posts from an existing failed line. Most CertainTeed fence calls we get in Pomona start the same way: a section leaning into the alley after a Santa Ana wind event, or pickets cracking where the afternoon sun hits the west-facing run hardest. We carry the common post profiles, rail brackets, and picket styles on our trucks, and we can usually walk the property and deliver a written price the same day.
Which CertainTeed Models This Applies To
CertainTeed’s fence line breaks into two families: the Bufftech vinyl systems and the ActiveYards aluminum collections. For vinyl, the Fairfield, Galveston, and Lexington series use a 5-inch square post with a routed rail pocket, while the older Bradford and Sherwood lines ran a 4-inch post with bracket-mounted rails. The difference matters because the rail spacing isn’t interchangeable, a compatibility gotcha we’ve seen trip up homeowners who ordered replacement rails online without checking the post dimension. Aluminum ActiveYards systems, including the Independence and Sentinel series, use a 2-inch x 2-inch post with a snap-lock rail, and the picket width varies between 5/8-inch and 3/4-inch depending on the series year.
To identify your model, check the inside of the post cap for a stamped date code and series name, or measure the post width at ground level and count the pickets per 8-foot section. OEM CertainTeed parts are still available through select distributors, but we also source quality aftermarket equivalents from Bufftech-compatible mills when the lead time on factory orders stretches past two weeks. Measure twice, then we can talk.
Signs Your CertainTeed Fence Installation Is Failing

- Posts leaning or wobbling at the base. In Pomona, this usually means the concrete footing has cracked from clay soil expansion after winter rains, or the post itself has rotted at grade if it’s an older wood-core vinyl sleeve. The fix is extraction and re-pouring, not shimming.
- Rails pulling out of post pockets. The routed pocket in vinyl posts can fatigue after 12-15 years of thermal cycling, especially on south-facing runs in Pomona’s inland heat. Once the pocket wall cracks, the rail won’t seat securely again.
- Picket cracking or discoloration. CertainTeed’s titanium dioxide UV package holds up well, but the western exposure along the 10 freeway corridor accelerates chalking and surface checking. Cracks start at the mounting holes and propagate outward.
- Gate sagging or latch misalignment. The aluminum frame members in ActiveYards gates can twist if the post they’re hung from has settled even 1/2 inch. We see this most on sloped lots in the Phillips Ranch area where drainage patterns shift the footing.
- Bottom rail collecting water or soil. Vinyl rails without weep holes, or with weep holes blocked by irrigation overspray, will swell and split during freeze-thaw cycles. Pomona doesn’t freeze hard often, but the San Gabriel Valley’s occasional 28-degree nights are enough.
Before
AfterReplacement Cost & What’s Included
For a full CertainTeed fence replacement in Pomona, expect $3,500-$9,000 installed. The low end covers roughly 100 linear feet of 4-foot vinyl privacy fence on level grade with good access; the high end gets you 200+ linear feet of 6-foot board-on-board with aluminum posts, a walk gate, and a double drive gate on sloped terrain with old post removal.
Our quotes are flat and written before any work starts. The price includes posts, rails, pickets, concrete, hardware, and labor. Permits, if required by Pomona’s Community Development Department for fences over 6 feet or on corner lots, are listed as a line item. Under Clause 1 of the Haven Standard, that written price is what you pay. No change proceeds without a signed change order, which is the discipline that has kept our projects within a few percent of the agreed cost across 4,000-plus jobs since 2007. Every fence installation carries our 365-Day Done Right Promise.
DIY or Call Us?

There’s no high-tension danger in fence work the way there is with garage door springs, but there is a hidden risk: buried utilities. Pomona’s older neighborhoods, particularly north of Holt Avenue, have shallow irrigation lines and unmarked electrical feeds that weren’t called in during the original 1980s installation. We pull permits and call USA North 811 as standard practice.
What you can safely check yourself: post wobble, rail pocket cracks, and whether your gate posts are plumb with a 4-foot level. What goes wrong in DIY: setting posts without a laser level, mixing concrete too wet for the footing to bear, and ordering the wrong rail profile. We’ve been called in to correct all three. If you’re matching an existing CertainTeed run and want it to look like one continuous fence, call (626) 606-1081 and we’ll bring samples and a written price.
FAQs
18-25 years with proper installation, though the western sun exposure common in Pomona’s hillside lots can shorten that to 15 years on the UV-facing side. Call (626) 606-1081 for an exact quote on replacement - estimates are free.
Isolated post or rail failure can be spot-repaired if the original series is still in production and the color hasn’t been discontinued. If the failure is systemic, multiple posts leaning or widespread picket cracking, replacement is more cost-effective than chasing individual repairs. Call (626) 606-1081 for an exact quote - estimates are free.
Most residential jobs in Pomona run 2-4 days: one day for post extraction and footing, one for post setting and curing, and one to two for rail and picket hang depending on linear footage and gate count. Call (626) 606-1081 to schedule your free estimate.
We carry the common Bufftech post profiles, ActiveYards rail brackets, and standard picket dimensions on our Pomona-area trucks. Specialty colors and discontinued series require a 5-10 day order cycle. Call (626) 606-1081 to confirm availability for your specific model - estimates are free.
Rowan Construction Group Pomona is an independent service provider and is not affiliated with CertainTeed Corporation. We also stock and install parts for KraftMaid cabinetry, Cambria and Silestone countertops, and other vetted brands across our seven trades.
Written by Grant Rowan, Owner, Rowan Construction Group Pomona at Rowan Construction Group Pomona, serving Pomona and nearby areas.







Before
After
Before
After
Before
After