Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sakrete Home Additions & ADU: The Pomona Owner’s Guide
We stock and install Sakrete-compatible concrete and masonry products for home additions and ADU foundations in Pomona, with typical installed pricing for foundation work running $45,000-$130,000 for full additions and $90,000-$220,000 for detached ADUs. Most Sakrete material calls in Pomona are fulfilled within one business day, and we carry high-strength mix variants on our trucks for same-day pour repairs. Homeowners usually discover a Sakrete foundation issue when hairline cracks widen after a wet winter, when a new ADU slab doesn’t pass inspection due to improper mix specification, or when an older addition’s footing shows spalling after years of Pomona’s clay-heavy soil expansion and contraction.
Which Sakrete Products This Applies To
Sakrete makes several concrete and mortar products that show up regularly in Pomona home additions and ADU work, and matching the right bag to the structural requirement matters more than most owners realize. For foundation footings and slab-on-grade work, we typically see Sakrete High-Strength Concrete Mix (the gray bag, 4,000 PSI at 28 days) specified on engineered plans. For ADU stem walls and block fill, Sakrete Masonry Mortar or Sakrete Surface Bonding Cement may be called out depending on whether the designer spec’d a conventional or dry-stack CMU wall system.
To identify what’s currently in your existing addition, check for stamped inspection cards on the framing or any leftover bags in the garage. The PSI rating and ASTM specification (C387 for preblended concrete, C270 for mortar) should match your permit documents. If they don’t, that’s a compatibility gotcha that can fail inspection in Pomona, where the Building & Safety Division checks mix design against the approved structural calculations. We also see owners try to substitute Quikrete 5000 or bagged countertop mix for structural work, which compressive strength tests won’t support. For ADU work specifically, we stock both OEM Sakrete and equivalent-spec alternatives from Teichert and Cemex that carry the same ASTM certification at comparable unit cost, so the written quote reflects honest numbers rather than inflated single-brand pricing.
Signs Your Sakrete Foundation or Slab Is Failing

- Hairline cracks that map diagonally across the slab. These often trace to differential settlement in Pomona’s expansive clay soils, especially near the Ganesha Hills area where cut-and-fill grading was common in older subdivisions. The crack itself isn’t structural yet, but it indicates the Sakrete slab is working harder than the subgrade preparation anticipated.
- Spalling or surface flaking, particularly after winter rains. This happens when the original pour used too much water in the mix or when the finishers sealed the surface before bleed water evaporated. In Pomona’s inland climate with 90-plus summer days and occasional freeze-thaw in the hills, that weak surface layer breaks down faster than it would closer to the coast.
- Foundation bolts pulling away from the sill plate. If the Sakrete footing didn’t achieve proper slump for full bolt embedment, or if the mix was poured too dry to flow around anchor hardware, the connection between concrete and framing loosens over time. We find this more often in owner-builder ADUs where the pour was rushed to beat a weather window.
- Water pooling against the stem wall with no obvious source. A properly placed Sakrete foundation includes dampproofing or waterproofing per the plan, but we’ve seen cases where the wrong product was used below grade, or where the foundation was backfilled with native clay that holds moisture against the wall. The concrete isn’t failing structurally yet, but the rebar inside is.
- Slab heave or drop of 1/2 inch or more across a 10-foot span. This is past the cosmetic stage. In Pomona’s 91766 and 91767 zip codes, where alluvial soil deposits vary block by block, an improperly compacted base under a Sakrete slab will telegraph through within the first few wet-dry cycles. The concrete itself may be fine; it’s the ground beneath that moved.
Before
AfterReplacement Cost & What’s Included
For Sakrete foundation repair and replacement work in Pomona, here’s how the numbers break down:
| Scope | Price Range | What’s Included |
|---|---|---|
| Partial slab repair (spall patching, crack injection) | $2,500-$7,500 | Demo to sound concrete, epoxy or urethane injection, Sakrete High-Strength topping, trowel finish |
| Stem wall repair (localized rebuild) | $5,000-$15,000 | Form and pour to engineer spec, rebar tie to existing, dampproofing, backfill with drain rock |
| Full foundation replacement, addition | $45,000-$130,000 | Complete demo, engineered footing design, permit pull, Sakrete or spec-equivalent pour, inspection scheduling, final grade |
| Detached ADU foundation, new | $90,000-$220,000 | Full build including foundation, framing, MEP rough, finishes; foundation portion typically 15-20% of total |
| Garage conversion foundation upgrade | $30,000-$80,000 | Slab evaluation, supplemental footings or full replacement, tie-in to existing structure, insulation per Title 24 |
The range within each category depends on three things: access (can a pump truck reach the pour, or are we wheelbarrowing?), soil condition (does geotech require deeper footings or engineered fill?), and whether the original permit drawings are available to verify what was supposed to be there. Under Clause 1 of the Haven Standard, the written price you receive before work starts includes all three variables priced out, not a low opening number with surprises after demo. Every foundation job carries our 365-Day Done Right Promise, and the photo record of the excavation, rebar placement, and pour is included as standard documentation.
DIY or Call Us?

There’s a clear line between what a Pomona homeowner can safely assess and where professional work becomes non-negotiable. You can check for crack patterns with a flashlight and tape measure, verify whether your original permit specifies a PSI rating, and photograph spalling for documentation. What you should not attempt: partial-depth slab removal that might cut embedded tension cables (common in post-tensioned ADU slabs permitted after 2015), any work within 18 inches of a gas meter or electrical service lateral, or a full footing replacement that requires shoring an existing structure while the foundation is temporarily unsupported.
Concrete work is heavy, permanent, and unforgiving of timing errors. A Sakrete pour that starts to set before it’s properly screeded and floated cannot be reworked; it has to come out. We’ve been called to more than one Pomona job where the owner mixed by the bag, underestimated the volume, and ended up with a cold joint between batches that leaked for years. If you’re unsure whether your crack is cosmetic or structural, call us at (626) 606-1081. We’ll look at it, photograph it, and give you a written opinion with a price if work is needed. No charge for the visit, and if you have another contractor’s estimate, we’ll review it line by line under our Free Second Opinion offer.
FAQs
A properly placed, properly cured Sakrete foundation in Pomona should last 50-plus years, but we’ve seen failures at 8-12 years when the mix was over-watered, the subgrade wasn’t compacted to 95% standard Proctor, or the drainage plane was omitted. The inland heat accelerates surface curing, which can trap moisture and weaken the matrix if the finishers worked it too soon. Call (626) 606-1081 for an exact quote on evaluation or repair - estimates are free.
Cracks under 1/4 inch that are stable (not growing seasonally) can often be epoxy-injected and monitored. Active cracks, those that show displacement across the plane, or any crack that admits water during Pomona’s winter rains indicate movement that patching won’t solve. We inject only after determining why the crack formed; otherwise we’re sealing in a problem that will reappear. Call (626) 606-1081 for an exact quote - estimates are free.
From permit pull to final inspection, a typical home addition foundation replacement in Pomona runs 4-6 weeks: 1-2 weeks for demo and excavation, 1 week for forming and rebar inspection, the pour and cure (concrete reaches 75% design strength in 7 days), then backfill and rough grade. ADU foundations often move faster because the scope is defined from the start, not discovered during demo. Call (626) 606-1081 to schedule your free estimate and we’ll give you a timeline with the written price.
We carry Sakrete High-Strength Concrete Mix, Fast-Setting Mix for small repairs, and Type S Mortar on our Pomona-area trucks, along with spec-equivalent alternatives from other vetted brands. For full pours requiring bulk delivery, we coordinate with local suppliers for same-day or next-morning drop to keep the schedule tight. We do not markup material; the quote shows our cost plus a flat handling fee that we disclose upfront. Call (626) 606-1081 for an exact quote on your specific mix requirement - estimates are free.
Rowan Construction Group Pomona is an independent contractor and is not affiliated with Sakrete. We source and install Sakrete and compatible products based on engineering specifications and customer preference.
Written by Grant Rowan, Owner, Rowan Construction Group Pomona at Rowan Construction Group Pomona, serving Pomona and nearby areas.







Before
After
Before
After
Before
After