Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Before
After
Before
After
Before
AfterBacksplash, Tile & Flooring in Pomona, CA
Backsplash, tile, and flooring work in a Pomona kitchen runs between $1,800 and $14,500 depending on material selection, square footage, and substrate condition – and Rowan Construction Group puts that number in writing before a single tile is set. If your kitchen surfaces are cracked, dated, or pulling away from the wall, this is the page that tells you what the fix actually costs and how the work gets done.
Grant Rowan started this company in 2007 with one standing rule: the price is written before anyone picks up a tool. That hasn’t changed across 4,000-plus projects, and it applies here the same as it does to every other trade under our roof. Call us at (626) 606-1081 if you want a flat written quote – estimates are free and come with a documented scope, not a ballpark figure.
This page covers backsplash installation, floor tile, and hard-surface flooring as part of our broader Kitchen Remodeling in Pomona service. If you’re planning a full kitchen gut, the tile and flooring work is sequenced into the larger project automatically. If you only need the surfaces refreshed, we handle that as a standalone scope too.
When You Need Backsplash, Tile & Flooring
- Grout that’s cracking, staining, or growing mold. Pomona’s warm summers push interior humidity through cycles that stress grout joints over time. Once grout breaks down behind a range or sink, water migrates into the drywall backer – and drywall is not a waterproof substrate. The longer that sits, the more you’re repairing.
- Tile that’s hollow when you tap it. A hollow tap means the tile has debonded from the mortar bed underneath. In kitchens built before 2000 – common in Pomona’s older neighborhoods like Lincoln Park and Westmont – the original mastic adhesive simply dries out and releases. One loose tile usually means several nearby are going the same way.
- A vinyl or laminate floor that’s lifting at the seams. Older sheet vinyl and floating laminate both react to temperature swings at the slab. When an expansion gap was left too tight at installation, the floor has nowhere to go and the seams pop up. In single-story homes with direct slab contact, this is a recurring problem in Pomona.
- A kitchen remodel that’s leaving the floor and backsplash behind. New cabinets and countertops against a thirty-year-old tile floor look exactly as mismatched as they sound. If you’re already in a remodel budget, the tile and flooring scope is the right time to address surfaces – not after the cabinets are installed and access is limited.
- Backsplash that ends at the upper cabinet line and nothing behind the range hood. The area directly behind a range takes the most grease and heat. If that section was never tiled, or was covered only with painted drywall, cleaning it is a recurring problem and the surface is degrading every time the burners run.
- Cracked floor tile at the dishwasher bay or refrigerator pull-out zone. Heavy appliance vibration and repeated loading concentrates stress on floor tiles in a tight band. A crack that looks cosmetic can be a sign that the mortar bed underneath has fractured – something a photo record at the start of the project documents clearly so you know exactly what was there before we started.
Our Backsplash, Tile & Flooring Process
- Free on-site estimate with a written scope. Grant Rowan or a senior crew member walks the kitchen, photographs the existing substrate, taps the tile field to identify hollow sections, checks the floor for level, and documents what we find. You receive a flat written price with a line-item scope before any commitment is made. Under Clause 1 of the Haven Standard, this is not a courtesy – it’s how every project starts, without exception.
- Material selection and sourcing from vetted suppliers. We pull from a network of fifty-plus vetted material brands, which gives the quote honest numbers. Tile prices vary widely – a basic ceramic field tile runs differently than a large-format porcelain slab or a handmade Saltillo unit – and we name the material, the format, and the per-square-foot cost in the written quote so you’re comparing real numbers, not categories.
- Substrate preparation before any tile goes down. This is where most tile failures start: inadequate prep. For backsplash work, that means removing the existing surface, verifying the backer (cement board or a proper moisture-resistant panel, not bare drywall), and correcting any out-of-flat sections. For floor tile, we check slab levelness – Pomona’s older residential slabs can have meaningful variation across a kitchen footprint – and float a mortar bed where needed. The photo record at this stage shows the substrate condition as-found and as-corrected.
- Tile setting, layout, and grouting. Layout lines go down before the first tile is set – this controls the pattern alignment at visible endpoints like doorways, windows, and upper cabinet lines. Thinset selection is matched to the tile format and substrate; large-format porcelain (anything over 15 inches) requires a medium-bed mortar to prevent lippage, which is the term for a tile edge that sits proud of its neighbor. Grout joint width is confirmed against the manufacturer’s recommendation and your preference before we mix a single batch.
- Trim, transitions, and sealing. Tile edges at the top of a backsplash run get a bullnose tile or a metal Schluter profile – named in the quote so you know which. Floor transitions at doorways and appliance cutouts are fitted and secured. Grout is sealed after curing – the sealant type and reapplication schedule is written into the project documentation so you’re not guessing two years from now.
- Final photo record and walk-through. Before the crew leaves, the finished installation is photographed and the documentation set is handed to you. This includes the as-built photos, the product and brand information for every material installed, the signed change orders (if any scope changes occurred during the project), and the written warranty terms under the 365-Day Done Right Promise. Nothing is verbal. If something isn’t right, the 365-Day Done Right Promise is what you cite – and Rowan makes it right.
Before
AfterBacksplash, Tile & Flooring Pricing in Pomona
Backsplash and tile work in Pomona ranges from under two thousand dollars for a straightforward ceramic field tile backsplash to well over ten thousand for a full-kitchen large-format porcelain floor with complex layout and full substrate reconstruction, or as part of a Full Kitchen Remodeling project. The table below shows honest ranges by scope. These are not minimums designed to get a crew in the door – they’re the numbers that have held across projects in this market.
| Scope | Typical Range (Pomona Market) | Primary Cost Driver |
|---|---|---|
| Standard ceramic backsplash (up to 30 sq ft) | $1,800 – $3,200 | Tile format, backer condition |
| Subway or mosaic tile backsplash with full coverage behind range | $2,400 – $4,500 | Material cost, cut complexity at hood |
| Natural stone or large-format porcelain backsplash | $3,800 – $6,500 | Material cost, substrate prep, sealing |
| Ceramic or porcelain floor tile (100-200 sq ft kitchen) | $3,200 – $6,800 | Slab levelness, tile format, demo |
| Large-format porcelain floor with mortar bed leveling | $5,500 – $9,500 | Mortar bed labor, material thickness |
| Combined backsplash and full floor tile replacement | $7,500 – $14,500 | Full scope, material selections, substrate condition |
What moves the number up or down
- Substrate condition. A kitchen where the backer board is intact and the slab is within a quarter-inch flat over ten feet costs less to tile than one that needs new cement board, a mortar float, or demolition of a previous tile-over-tile installation. The as-found photo record documents this before any scope is written.
- Tile format and source. A 4×12 subway tile from a domestic manufacturer runs differently than a 24×48 imported porcelain slab. Both are valid choices; the price difference is real and it’s named in the quote.
- Pattern complexity. A running bond or stacked layout takes less cut time than a herringbone, diagonal, or custom medallion. Labor follows complexity – that’s the honest answer.
- Existing tile layers. In Pomona homes built in the 1970s and 1980s, it’s not unusual to find two or even three tile layers stacked on a floor. Each layer adds demo weight and disposal cost. We document layer count in the estimate, not after demo day.
- Scope of the broader project. When backsplash and flooring are part of a full Kitchen Remodeling scope, some prep and finish steps overlap, and the combined quote reflects that.
Every estimate is free. Call (626) 606-1081) and we’ll schedule the on-site visit. If you have a written estimate from another contractor, bring it – the Free Second Opinion offer applies, and Grant Rowan will go through it line by line at no charge.
FAQs – Backsplash, Tile & Flooring in Pomona
How much does a kitchen backsplash cost in Pomona?
A kitchen backsplash in Pomona typically costs between $1,800 and $6,500 depending on tile material, square footage, and the condition of the existing backer. A standard ceramic subway tile installation on a 25-30 square foot backsplash with intact backer board usually lands between $1,800 and $3,200. Natural stone, large-format porcelain, or a full wall behind a commercial-style range hood pushes that number toward $5,000-$6,500 once material and additional prep labor are factored in. Call (626) 606-1081 for a flat written quote – the number you get is the number on the contract.
Can you tile over existing tile in my Pomona kitchen?
Tiling over existing tile is sometimes possible, but it’s not a decision to make without assessing the base layer first. If the existing tile is fully bonded, the floor or wall is structurally sound, and the added thickness won’t conflict with Cabinet Installation & Refacing reveals, door swings, or appliance heights, an overlay can work. But if the existing tile is hollow in sections, the adhesive has failed, or there’s any moisture intrusion behind the wall tile, overlay will fail the same way the original did – usually faster. We tap and document the existing field during the estimate visit so that call is based on what we actually find, not a general policy. In older Pomona kitchens, failed mastic under floor tile is common enough that demo and reset is more often the right answer than overlay.
How long does kitchen tile and flooring installation take?
A backsplash-only installation in a standard Pomona kitchen runs 1-2 days for installation, plus 24-48 hours for mortar and grout cure before the surface is back in full use. A full kitchen floor tile replacement – demo, substrate prep, setting, grouting, and sealing – typically runs 3-5 days depending on slab condition and tile format. Large-format porcelain that requires a mortar bed float adds a full day of cure time before tile can go down. The project schedule is written into the quote so you have a clear window before the crew arrives.
What tile brands and materials does Rowan Construction Group use?
We source tile and hard flooring from a vetted supplier network rather than committing every customer to one manufacturer – because the right tile for a 1975 Pomona ranch kitchen is different from what works in a newer build in College Park East. Domestic ceramics, imported large-format porcelain, handmade Saltillo, natural travertine, and engineered stone formats are all in the sourcing pool for Cabinets & Countertops and flooring projects. The specific tile – manufacturer, format, SKU, price per square foot – is named in the written quote so you know exactly what you’re approving. If you have a material in mind already, bring the spec sheet and we’ll price the installation around it.
Why Pomona Homeowners Choose Rowan for Tile Work
Pomona’s housing stock is older than most of the Inland Empire. Homes in the Westmont, Lincoln Park, and Ganesha Hills neighborhoods frequently have original tile floors set on mud beds from the 1960s and 1970s, and backsplash walls that have been retiled over existing tile more than once. That layered history shows up in the substrate, and it affects the price – which is why the written quote comes after an on-site inspection, not before.
Grant Rowan has run this company since 2007. The founding discipline was simple: put the price in writing before anyone starts, document what the crew found and what they did, and back the work with a guarantee that doesn’t require the homeowner to argue for it. The 365-Day Done Right Promise is printed on every project document, not buried in an asterisk. If a tile cracks under normal use, if a grout joint opens, if a floor transition loosens – those are covered calls, not debates.
Background-checked, uniformed crews. A live person answering calls at any hour. A documented photo record from the first site visit through the final walk-through. These are standard deliverables on every project, not features reserved for larger scopes.
If you’ve already received a written estimate from another contractor, the Free Second Opinion offer stands. Bring the quote and Grant will review it line by line – material costs, labor rates, substrate assumptions – so you understand what you’re being asked to sign before you sign it.
To get a flat written estimate for backsplash, tile, or kitchen flooring in Pomona, call (626) 606-1081. The estimate is free, the number is written, and the scope is yours to review before any work begins.
Written by Grant Rowan, Owner at Rowan Construction Group Pomona, serving Pomona.