Boral Windows & Doors Nationwide

Boral Windows & Doors: The Pomona Owner’s Guide

We stock and install Boral-compatible windows and doors across Pomona, with replacement units typically running $4,500-$15,000 installed depending on frame material, glazing package, and opening count. Most Boral hardware and sash components are available same-day through our supplier network, and we carry common rollers, locks, and weatherstrip profiles on our trucks. Pomona owners usually discover a problem when a window won’t stay open, a door drags on the threshold, or they feel a draft along the jamb during a Santa Ana wind event - the kind of gradual failure that gets worse every season you wait.

Call (626) 606-1081

Which Boral Models This Applies To

Boral’s window and door catalog spans multiple series, and the part you need depends on when your unit was manufactured. Pre-2018 Boral vinyl windows often used a specific roller housing with a 1-1/4 inch wheel diameter and a stamped-steel bracket that corrodes in Pomona’s intermittent heavy rain pattern. Newer Boral aluminum-clad units shifted to a stainless roller and a different track profile, so the housings are not interchangeable even if the sash looks similar. Check the etched code in the glass corner or the label on the frame head - the series prefix (BV, BA, or BPD for patio doors) tells us which hardware matrix to pull.

We source OEM Boral hardware where it’s still in production, but we’ve also vetted aftermarket equivalents from Truth Hardware and Amesbury that meet the original spec at lower cost. The aftermarket route makes sense for discontinued series; for units still under Boral’s limited warranty, OEM preserves coverage. We’ll check your label and tell you which path applies before we quote. Measure twice, then we can talk.

Signs Your Boral Windows & Doors Is Failing

• The sash slams shut or won’t stay open. This usually means the balance system has lost tension - in Boral’s case, a spiral-tube or block-and-tackle balance depending on series vintage. Pomona’s dry heat hardens the lubricant, and the tube cracks after about 12-15 years of UV exposure.
• You feel air movement at the meeting rail or sill. The pile weatherstrip compresses permanently over time, and Boral’s specific kerf width (0.270 inch on most vinyl units) means generic replacement won’t seat properly without jamming the sash.
• The lock tongue won’t engage or requires shoulder pressure. The keeper shifts as the frame settles, or the cam lock itself wears where the zinc casting meets the steel spindle. Either way, forcing it strips the mechanism.
• The patio door rolls rough or jumps the track. Boral’s adjustable roller assemblies use a polymer bushing that degrades with grit and moisture from Pomona’s occasional hard rain. Once the bushing goes, the wheel cants and chews the track.
• Condensation between glass panes. The edge seal has failed, and the desiccant inside the spacer is saturated. This is not a hardware fix - the insulated glass unit needs replacement, but we can match the Boral grid pattern and Low-E coating.

Before

After

Replacement Cost & What’s Included

For full Boral window replacement in Pomona, budget $4,500-$15,000 depending on unit count, frame material, and whether we’re working with standard sizes or custom openings. Hardware-only repairs - balance replacement, roller swap, lock and keeper set - typically fall between $180 and $520 per opening, including parts and labor. The range moves with accessibility: a ground-floor double-hung is straightforward; a second-story fixed picture unit over a tile roof requires scaffolding and more time.

Every repair quote is flat and written before work starts, per Clause 1 of The Haven Standard. Parts carry a one-year warranty; our workmanship carries the 365-Day Done Right Promise. You’ll get a documented photo record of the failed component and the installed replacement, plus the signed scope sheet showing exactly what was opened, what was replaced, and what was tested.

DIY or Call Us?

There’s a safe middle ground here. An owner can inspect the label, photograph the failure, and check the track for debris without risk. What we don’t recommend is removing a Boral sash solo - the balance is under load, and a slipped tool can send the sash down hard on fingers or through the frame. The spiral balance systems in particular require a winding tool specific to the tube diameter; improvised methods break the tube or the bracket.

Same for patio door rollers: the unit weighs 80-120 pounds, and the adjustment screw is accessed from the bottom edge with the door partially lifted. If the roller housing is seized in the frame channel, forcing it distorts the track. We’ve replaced enough DIY-damaged tracks to know the savings evaporate fast. For a written price on the repair and a crew that carries the right Boral-compatible parts, call us at (626) 606-1081.

FAQs