Cambria Driveway & Pavers Nationwide

Cambria Driveway & Pavers: The Pomona Owner’s Guide

We stock and install Cambria-compatible driveway and paver systems in Pomona, with typical installed pricing running $7,000-$18,000 for paver driveway work and $3,500-$11,000 for paver patio installation depending on substrate condition and pattern complexity. Most Cambria paver replacements and repairs can be scheduled within a few business days, and we carry common edge restraints, bedding sand specs, and paver units on our trucks for the Pomona market. Most homeowners realize their Cambria paver system is failing when they notice shifting after winter rains, joint sand washing out toward the alley, or a sunken section near the garage apron where the base compacted unevenly - problems that start small in Pomona’s clay-heavy soils and expand with every heat cycle.

Call (626) 606-1081

Which Cambria Models This Applies To

Cambria produces engineered stone primarily for countertop applications, but the brand name gets attached to paver and hardscape projects when homeowners or previous contractors specify Cambria aesthetic standards - tight joints, consistent color batching, and precise dimensional tolerances - applied to driveway and patio surfaces. If your driveway or walkway was sold as “Cambria-style,” check for documentation that specifies the actual paver manufacturer: Belgard, Techo-Bloc, or Unilock are common sources for the quartz-like finishes that get labeled Cambria-adjacent in Pomona spec sheets.

To identify what you’re working with, look for a stamped code on the paver edge or a project binder from the original installer. Measure the exact paver dimensions - 60mm, 80mm, or 100mm thickness matters for load-bearing capacity on a driveway - and note whether the pattern is running bond, herringbone, or basket-weave. The herringbone pattern at 45 degrees handles vehicle loads better, which is why we see it specified more often on Pomona driveways near the Fairplex corridor where older homes have heavier clay expansion. OEM-matched pavers from the original batch are ideal for color consistency; when those are discontinued, we source from the same production run at our supplier in Ontario to get within a shade rather than hoping a big-box special order matches.

Signs Your Cambria Driveway & Pavers Is Failing

• Individual pavers rocking underfoot. This usually means the bedding sand layer has washed out or compacted unevenly, leaving a void beneath the unit. In Pomona, where winter storms drop hard rain on baked clay, this happens faster on slopes that drain toward the house rather than away from it.
• Weeds or grass growing through joints. Polymeric sand has broken down or was never installed properly. The joint sand is what locks the paver field together; once it’s gone, the edge restraints take all the lateral load and they fail next.
• Sunken or humped sections near the garage or walkway. This indicates base failure - either insufficient compacted aggregate (we spec 6-8 inches of class II base for Pomona clay) or water intrusion that saturated the subgrade. The freeze-thaw isn’t severe here, but the expansion and contraction of clay soils does similar work over time.
• Chipped or spalled paver surfaces. On driveways, this points to pavers rated for pedestrian traffic being used where vehicular load was required. The 60mm units look identical to 80mm in the catalog but crack under a truck’s turning radius.
• Edge restraints pulling away from the perimeter. Plastic edging spikes work loose in Pomona’s expansive soil, especially on south-facing exposures where thermal cycling is most aggressive. Once the edge goes, the field follows.

Before

After

Replacement Cost & What’s Included

For Cambria-style paver driveway work in Pomona, our installed pricing runs $7,000-$18,000 depending on square footage, base condition, and whether we’re matching an existing pattern or starting fresh. Paver patio installation ranges $3,500-$11,000. Driveway sealing, which we recommend every 3-4 years in Pomona’s UV exposure, runs $250-$700.

What drives the range: access for excavation equipment, how much of the base has failed (we find out when we strip it), and whether the original pavers are still available for matching. Under Clause 1 of the Haven Standard, the price we write is the price you pay - no change order gets signed unless you request a scope change, and no work proceeds on that change until the paperwork is done. Every job carries our 365-Day Done Right Promise and a documented photo record of base condition, installation steps, and final compaction readings.

DIY or Call Us?

There’s honest work a homeowner can do: check whether the joint sand is still solid by running a screwdriver along the gaps, look for standing water after a rain that indicates drainage problems, and photograph any cracking pattern before it spreads. What doesn’t work on your own is base repair - removing pavers without disturbing the field, adding and compacting aggregate in lifts, and reinstalling with proper edge restraint. The compactor alone rents for $80-$120 a day in Pomona, and without plate compactor experience on a 4,000-pound machine, you’ll get uneven density that shows up as dips in six months.

We carry common paver units, polymeric sand, and edge restraint on our trucks for the Pomona area, and we can usually assess whether you’re looking at a sectional repair or full replacement in one visit. Call (626) 606-1081 to schedule your free estimate - we’ll bring sample boards and give you a written price before anyone picks up a tool.

FAQs