Cover Driveway & Pavers Nationwide

Cover Driveway & Pavers: The Pomona Owner’s Guide

We stock and install Cover-compatible driveway and paver systems in Pomona, with typical installed pricing running $7,000-$18,000 for paver driveways and $3,500-$11,000 for paver patios depending on substrate condition and pattern complexity. Most Cover paver replacements and repairs can be scheduled within 24-48 hours, and we carry common Cover-compatible base materials and edge restraints on our trucks. Most Pomona homeowners discover their Cover driveway or paver installation is failing when they notice shifting patterns after winter rains, pooling water where drainage used to work, or weeds pushing through joints that were previously tight - usually three to seven years after the original install, sooner if the base was compacted inadequately for our clay-heavy Pomona soil.

Call (626) 606-1081

Which Cover Models This Applies To

Cover’s driveway and paver line spans several series, and matching the right components matters because the edge restraint profiles and paver thicknesses vary. The Cover Classic series uses 60mm pavers with a snap-edge restraint system, while the Cover Pro series steps up to 80mm pavers designed for vehicular loads with a heavier aluminum-edge profile. If you’re unsure which you have, check the original invoice for a model prefix - CC for Classic, CP for Pro - or measure paver thickness at an exposed edge. The base material specification also differs: Classic calls for 4 inches of compacted Class II base in residential applications, while Pro requires 6 inches plus a geotextile fabric layer.

For Cover systems, we typically recommend OEM-compatible pavers and edge restraints rather than generic substitutions. The interlock geometry on Cover pavers is proprietary, and aftermarket pavers with similar dimensions often don’t lock correctly, leading to the same shifting you’re probably seeing now. We source Cover-compatible materials through Belgard and Techo-Bloc, both of which produce lines that interlock correctly with Cover’s specifications and carry comparable compressive strength ratings. If your original install used a Cover-specific color blend, we can match it from archived production runs or suggest a complementary transition pattern that doesn’t look like a patch job.

Signs Your Cover Driveway & Pavers Is Failing

• Sunken or dipping sections. This usually means the base material has washed out or wasn’t compacted to 95% standard Proctor density during the original install. In Pomona, our seasonal heavy rains accelerate this if drainage wasn’t graded at 1/4 inch per foot away from structures.
• Weeds growing through joints. Polymeric sand has degraded or was never properly installed. The sand binds the joint and blocks weed growth; once it breaks down, Pomona’s wind-blown seed load moves in fast.
• Pavers rocking underfoot or tire. The bedding sand layer has eroded or the base has settled unevenly. This creates a tripping hazard and accelerates paver edge chipping as loads concentrate on corners instead of distributing across the interlock.
• Standing water after light rain. The original grade has shifted or the permeable base has clogged with fine sediment. In Pomona’s inland valley, this is often worse on north-facing driveways where evaporation is slower.
• Edge restraints pulling away from the perimeter. Spikes have corroded or the restraint wasn’t anchored deep enough into the native soil. Once the edge goes, the field pavers lose lateral support and the whole pattern starts to wander.

Before

After

Replacement Cost & What’s Included

The wide ranges reflect real variables: driveway square footage, whether we need to remove and dispose of existing material, and what we find when we strip to the subgrade. Pomona’s expansive clay soils sometimes require additional base depth or a stabilization fabric that wasn’t in the original scope. Under Clause 1 of the Haven Standard, you’ll get a written price before any work starts, and no change proceeds without a signed change order - the discipline that has kept our projects within a few percent of the agreed number across 4,000-plus jobs. Every paver install carries our 365-Day Done Right Promise: if it’s not done right, we make it right.

DIY or Call Us?

There’s a honest line here. A homeowner can safely check whether pavers are rocking by walking the surface and marking problem areas with chalk. You can also clear debris from joints and verify that downspouts aren’t dumping water directly onto the driveway edge. What you shouldn’t attempt: lifting settled sections without understanding what’s underneath, because the base repair requires plate compaction at specific moisture content that most rental compactors don’t achieve. And if your Cover system includes any integrated drainage channels or permeable paver installations, the grading calculations affect your foundation - get that wrong and water goes where you don’t want it.

We’ve seen DIY paver resets in Pomona’s Lincoln Park neighborhood fail within two seasons because the base wasn’t recompacted in lifts, or because the wrong sand grade was used as bedding. Measure twice, then we can talk. Call (626) 606-1081 and we’ll give you a written estimate that breaks out removal, base work, materials, and labor line by line - no charge, no pressure.

FAQs