Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Owens Corning Driveway & Pavers: The Pomona Owner’s Guide
We stock and install Owens Corning-compatible driveway and paver systems in Pomona, with paver driveway installations running $7,000-$18,000 and concrete driveway work at $4,500-$12,000 depending on substrate condition and square footage. Most Pomona homeowners discover their Owens Corning driveway system is failing when they notice pooling after winter rains, settling along the Fairplex corridor’s clay-heavy soil, or joint sand washing out from the freeze-thaw cycles our inland valley sees each January. The damage usually starts at the edges where the base meets the street, then creeps inward until the whole surface shifts.
Which Owens Corning Models This Applies To
Owens Corning’s hardscaping line centers on the Duration Paver System and the older Supreme Driveway series, both of which use a proprietary interlock geometry that differs from standard Belgard or Techo-Bloc patterns by about 3/16 inch. If you’re trying to match existing Owens Corning pavers, check the underside for the molded “OC” stamp and a four-digit date code - the first two digits indicate the plant batch, and anything before 2018 used a different edge profile that won’t lock cleanly with current stock.
We carry OEM-equivalent Owens Corning pavers in the common Pomona color blends - Desert Tan, Sierra Gray, and the discontinued Adobe Red that still shows up in Phillips Ranch and north Pomona neighborhoods. For the Supreme series, which Owens Corning phased out around 2019, we source compatible aftermarket units from our vetted supplier network that match the 60mm thickness and chamfer edge, though the surface texture varies slightly. We always bring sample boards to the estimate so you can see the match in your actual driveway light before we write the price.
Signs Your Owens Corning Driveway & Pavers Is Failing

- Sunken or tilted pavers near the garage apron or street edge. This usually means the aggregate base has washed out or compacted unevenly, often from irrigation runoff or the heavy clay soils common west of Garey Avenue that hold water and shift seasonally.
- Weeds growing through the joints despite recent polymeric sand. The joint sand has degraded below the surface, or the original installation skipped the proper bedding layer - a frequent issue with Owens Corning systems installed by generalists who treated pavers like decorative concrete.
- Chipped or spalling paver surfaces, especially on the lighter-colored blends. Owens Corning’s lighter pigmentation uses a denser aggregate mix that can delaminate under de-icing salts or the magnesium chloride some Pomona HOAs mandate for winter safety.
- Standing water more than 30 minutes after rain stops. The original pitch has reversed due to base settlement, or the permeable joint material has clogged with fine sediment from the San Gabriel Valley’s dusty spring winds.
- A hollow sound when you tap pavers with a rubber mallet. The bedding sand has eroded, leaving an air gap that will crack the paver under vehicle load - common on driveways that handle delivery trucks or RVs.
Before
AfterReplacement Cost & What’s Included
For Owens Corning driveway systems in Pomona, here’s how the installed pricing breaks:
| Scope | Price Range |
|---|---|
| Sectional paver repair (under 200 sq ft) | $1,800-$4,500 |
| Full paver driveway replacement | $7,000-$18,000 |
| Concrete driveway replacement | $4,500-$12,000 |
| Base remediation only (no new surface) | $2,500-$6,000 |
| Joint sand refresh + stabilization | $250-$700 |
The range depends on three things we assess at the estimate: how much of the aggregate base needs removal and recompaction, whether the original edge restraints are still structurally sound, and access for our equipment - narrow Pomona lots between 1900s bungalows sometimes require hand-disassembly of the first course. Under Clause 1 of the Haven Standard, the written price you sign includes all labor, materials, disposal, and the documented photo record; no change proceeds without a signed change order. Our 365-Day Done Right Promise covers the installation workmanship, and we pass through the manufacturer’s material warranty where applicable.
DIY or Call Us?

There’s a honest line here. A homeowner with a rubber mallet, a bag of polymeric sand, and a free Saturday can usually reset a few loose pavers and refresh joints - provided the base underneath is still solid. Tap around with that mallet first; if everything sounds dense and the pavers don’t rock, you’re in maintenance territory, not replacement territory.
Where DIY goes wrong is base work. Removing even a small section of Owens Corning pavers to regrade the aggregate requires plate compaction in lifts, proper drainage slope toward the street (Pomona code requires 1% minimum), and edge restraint anchoring that most rental yards don’t stock. We’ve been called to fix homeowner attempts where the surface looked fine for three months, then the spring rains hit and the whole repair settled two inches because the base wasn’t compacted in 4-inch lifts with a vibratory plate. Measure twice, then we can talk - call (626) 606-1081 and we’ll assess whether you’re looking at a Saturday project or a crew day.
FAQs
Properly installed Owens Corning pavers last 25-30 years in Pomona’s inland valley conditions, though the intense summer UV and occasional freeze-thaw cycles will fade surface color and degrade joint sand faster than coastal installations. The clay soils west of Towne Avenue accelerate base settlement, so edge restraint inspection every 3-4 years extends the service life significantly. Call (626) 606-1081 for an exact quote - estimates are free.
Sectional repair works when the damage is limited to under 20% of the surface and the base is still structurally sound; we remove the affected pavers, regrade and compact the base, then reinstall with matching units. Full replacement becomes the honest recommendation when you see multiple failure patterns - settling, weed intrusion, and spalling together usually mean the original base preparation was inadequate across the entire footprint. Call (626) 606-1081 for an exact quote - estimates are free.
A typical residential driveway replacement in Pomona runs 3-5 working days: one day for removal and base excavation, one to two days for aggregate placement and compaction in lifts, and one to two days for paver installation, joint sand, and final compaction. Weather delays are rare in our climate, but we won’t install polymeric sand if rain is forecast within 24 hours - it activates prematurely and leaves a haze. Call (626) 606-1081 for an exact quote - estimates are free.
We maintain inventory of the current Owens Corning Duration series in the three color blends most common to Pomona installations, plus compatible edge restraints and joint sand matched to the original spec. Discontinued Supreme series colors or specialty-order blends require 2-3 weeks from our supplier, though we can often source close matches from our broader paver network to keep projects moving. Call (626) 606-1081 for an exact quote - estimates are free.
Rowan Construction Group Pomona is an independent service provider and is not affiliated with Owens Corning. We also stock parts for KraftMaid, Cambria, and Silestone systems.
Ready to get a written price before anyone picks up a tool? Call (626) 606-1081 to schedule your free estimate. We’ll bring sample boards, assess your base condition, and leave you with a flat written quote and a documented photo record - the Haven Standard, not a handshake.
Written by Grant Rowan, Owner, Rowan Construction Group Pomona at Rowan Construction Group Pomona, serving Pomona and nearby areas.







Before
After
Before
After
Before
After