Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Techo-Bloc Bathroom Remodeling: The Pomona Owner’s Guide
Techo-Bloc bathroom remodeling in Pomona typically runs $9,000-$28,000 for a full remodel using Techo-Bloc hardscape materials, with smaller wet-area refreshes starting around $5,000. We stock Techo-Bloc-compatible installation systems and can usually begin material procurement within 48 hours of a signed scope. Most Pomona homeowners discover their Techo-Bloc shower pan or wall system needs attention when they notice efflorescence blooming through grout joints, or when the modular paver-style floor system starts shifting underfoot in the damp bathroom environment.
Which Techo-Bloc Models This Applies To
Techo-Bloc does not manufacture traditional bathroom fixtures; instead, their bathroom-adjacent systems include the Blu 60 and Blu 80 permeable paver lines sometimes used for outdoor shower bases, the Antika and Villagio textured slabs adapted for wet-room flooring, and the Industria series for commercial restroom applications. The critical compatibility gotcha in Pomona’s inland climate: Techo-Bloc’s standard 60mm pavers are rated for pedestrian traffic but not for the constant moisture cycling of a bathroom without a vapor-managed substrate. We verify the SKU against the HD2 (high-density, 2-inch) spec, which is the minimum we install in wet areas. OEM Techo-Bloc installation kits include their proprietary Flexlock polymeric sand and drainage mat; aftermarket equivalents from Techniseal or Alliance Gator perform comparably but void the manufacturer’s finish warranty if mixed. Check the underside label for the production date code - Techo-Bloc reformulated their surface treatment in 2019, and pre-2019 stock bonds differently with current-setting adhesives.
Signs Your Techo-Bloc Bathroom Remodeling Is Failing

- White powder blooming in grout lines. This is efflorescence, mineral salts drawn through the paver body by moisture migration. In Pomona’s low-humidity summers followed by winter rains, the expansion-contraction cycle accelerates this. It means your vapor barrier is compromised or was never installed to Techo-Bloc’s HD2 wet-area spec.
- Pavers shifting or rocking underfoot. The bedding layer has eroded or the edge restraints have failed. Techo-Bloc’s modular system relies on interlock tension; once that goes, the floor becomes a trip hazard and water pools beneath.
- Grout crumbling at the perimeter. The movement joint was filled with rigid grout instead of flexible sealant. Techo-Bloc expands roughly 0.3% across a 10-foot span in direct sun; bathrooms with south-facing windows see similar thermal load.
- Damp odor rising from the floor. Water is migrating through the paver joints into the substrate. With Techo-Bloc’s permeable design, this is either working as intended (draining to a proper French drain) or failing catastrophically (draining into your subfloor).
- Surface spalling or flaking. The paver face is delaminating, usually from freeze-thaw exposure or from acidic cleaning products breaking down the factory seal. Pomona rarely freezes hard, but unheated outdoor-adjacent bathrooms do.
Before
AfterReplacement Cost & What’s Included
| Scope | Price Range in Pomona |
|---|---|
| Small bathroom refresh (Techo-Bloc wet-area floor, partial wall) | $5,000-$12,000 |
| Full bathroom remodel with Techo-Bloc hardscape flooring | $9,000-$28,000 |
| Walk-in shower installation with Techo-Bloc base system | $4,500-$12,000 |
| Tub-to-shower conversion with paver-style floor | $3,500-$10,000 |
The spread depends on three things: whether we need to rebuild the substrate to Techo-Bloc’s HD2 drainage spec, how much of the existing hardscape can be salvaged, and whether the project triggers Pomona’s permit threshold for wet-area modifications (typically any shower pan relocation or new plumbing rough-in). Every quote is a flat written price with line-item breakdown - material, labor, permit, disposal - before anyone picks up a tool. Under Clause 1 of the Haven Standard, that number does not change without a signed change order. Our 365-Day Done Right Promise covers the installation; Techo-Bloc’s manufacturer warranty covers material defects.
DIY or Call Us?

Here’s where we’re honest. A homeowner can safely check: whether the floor slopes to a drain (pour a bucket, watch where it goes), whether the grout is actually grout or caulk (poke it with a screwdriver - grout chips, caulk flexes), and whether the perimeter has a soft movement joint or rigid filler. What goes wrong fast: Techo-Bloc’s permeable system requires a calculated base of 3/4-inch crushed stone graded to 2% slope minimum, with a geotextile separation layer. Get the base wrong and you’re rebuilding in two years. The polymeric sand activation demands precise water volume - too little and it doesn’t set, too much and it washes into the drainage bed, clogging it. We don’t do scare tactics, but we do pull permits and pass inspections. Measure twice, then we can talk. If you’re staring at a damp, shifting floor, call (626) 606-1081 and we’ll schedule a free estimate with a written scope.
FAQs
In Pomona’s inland climate - hot, dry summers and mild, occasionally wet winters - a properly installed Techo-Bloc wet-area floor lasts 15 to 25 years. The lifespan shortens if the original installer skipped the vapor barrier or used standard 60mm pavers instead of the HD2 wet-area spec. Call (626) 606-1081 for an exact quote - estimates are free.
Sometimes. Isolated paver replacement works if the substrate is dry and the interlock pattern is still intact. We lift the affected units, verify the base condition with a borescope, and reinstall with matching material. If the substrate is saturated or the pattern has migrated, partial reconstruction is the honest recommendation. Call (626) 606-1081 for an exact quote - estimates are free.
Most Pomona projects run 2 to 4 weeks from demolition to final walkthrough, assuming permits are pre-approved and no change orders arise. Techo-Bloc material lead time is typically 5 to 7 business days from their Ontario distribution yard. We build that into the schedule so crews aren’t standing around. Call (626) 606-1081 for an exact quote - estimates are free.
We do not stock finished Techo-Bloc inventory - the color and texture range is too broad for a contractor warehouse. What we keep on hand: the HD2 drainage components, Flexlock polymeric sand, geotextile, and edge restraint systems. We source your specific paver or slab directly from Techo-Bloc’s Ontario facility, typically within a week. Call (626) 606-1081 for an exact quote - estimates are free.
Rowan Construction Group Pomona is an independent service provider and is not affiliated with, endorsed by, or sponsored by Techo-Bloc. We also stock parts and installation systems for KraftMaid, Cambria, and Silestone products.
Ready to price your Techo-Bloc bathroom project? Call (626) 606-1081 to schedule your free estimate. You’ll receive a flat written price with line-item scope before any work starts, a documented photo record of every visit, and the 365-Day Done Right Promise backed by The Haven Standard. Bring a competitor’s written estimate and we’ll review it line by line at no charge.
Written by Grant Rowan, Owner, Rowan Construction Group Pomona at Rowan Construction Group Pomona, serving Pomona and nearby areas.







Before
After
Before
After
Before
After